17
Balancer Cube
Operator’s manual
3.3.4 Automatic acquisition of the wheel dimensions for the ALS1 and ALS2
Program Types
To
automatically enter the dimensions of the wheel in the ALS1 and ALS2 Program
types, proceed as follows:
1.
Assemble the wheel on the shaft;
2.
Extract the Distance/Diameter sensor and place it on the plane chosen as the internal plane. The
point of support differs depending on whether the ALS1 or ALS2 program has been enabled. See
figures F3.7 and F3.8;
3.
Wait to hear the long acquisition beep and then set the sensor back to the rest position;
4.
Extract the Distance/Diameter sensor and place it on the plane chosen as the external plane. See
figure F3.9;
5.
Wait to hear the long acquisition beep and then set the sensor back to the rest position;
6.
The dimensions of the wheel have been acquired and the values can be displayed and/or modified
by
pressing [P1]
for the
di1/di2
values (internal/external plane distance) and [P3]
for the
da1/da2
values (internal/external diameter plane).
Figure F3.7 - Automatic acquisition of the internal plane distance in the ALS1 Program Type
Figure F3.8 - Automatic acquisition of the internal plane distance in the ALS2 Program Type
Содержание OSPREY BP63
Страница 1: ...BP63 OSPREY...
