BRIGHT OSPREY BP63, Руководство оператора

Страница: 10 / 44

9 Balancer Cube Operator’s manual
Table T3.1.1 Angular position of the balancing weights in the various Program Types
Machine
data
acquisition
system
Program Type
STD,
ALU1,2,3,4,5
ALS1 ALS2
Internal
Plane
External
Plane
Static
Plane
Internal
Plane
External
Plane
Static
Plane
Internal
Plane
External
Plane
Static
Plane
Manual
H12 H12 H12 H12 H6 H6 H6 H6 H6
Semi-auto-
matic
H12 H12 H12 H12
Sensor-
rim
contact
point
(1)
H6
Sensor-
rim
contact
point
(1)
Sensor-
rim
contact
point
(1)
H6
Automatic
H12 H12 H12 H12
Sensor-
rim
contact
point
(1)
H6
Sensor-
rim
contact
point
(1)
Sensor-
rim
contact
point
(1)
H6
Note (1): if the data acquisition system is disabled, the angular position of the weight will be in the 6 o’clock
position.
In table T3.1.1, the symbol H12 indicates that the angular position of the weight is at 12 o’clock while the
symbol H6 indicates that the angular position of the weight is at 6 o’clock.
The machine data acquisition systems are defined as follows:
• Manual when the data of the rim must all be entered manually;
• Semi-automatic when the Distance and Diameter data are automatically acquired via the Distance/Dia-
meter sensor while the data on the Width must be entered manually;
Automatic or Semi-Automatic machines with the sensors disabled (due to failure or for any other
reason) become, for all intent s and purposes , Manual machines. Entering the dimensions of the rims must
be carried out manually and the angular position of the balancing weights will follow the procedures of
the Manual machines.
3.2 Wheel type
The machine provides a choice between three different Wheel Types as listed in table T3.2.
Table T3.2 - Wheel Types to select
Wheel type Vehicle Notes
CAR
Auto-vehicles Start-up default