Bosch Rexroth IndraDrive Mi Скачать руководство пользователя

Страница: 41 / 340

●

Applications for functional safety are only allowed if clearly and explicitly

specified in the application documentation "Integrated Safety Technolo‐

gy". If this is not the case, they are excluded. Functional safety is a safe‐

ty concept in which measures of risk reduction for personal safety de‐

pend on electrical, electronic or programmable control systems.

●

The information given in the application documentation with regard to

the use of the delivered components contains only examples of applica‐

tions and suggestions.
The machine and installation manufacturers must
–

make sure that the delivered components are suited for their indi‐

vidual application and check the information given in this applica‐

tion documentation with regard to the use of the components,

–

make sure that their individual application complies with the appli‐

cable safety regulations and standards and carry out the required

measures, modifications and complements.

●

Commissioning of the delivered components is only allowed once it is

sure that the machine or installation in which the components are instal‐

led complies with the national regulations, safety specifications and

standards of the application.

●

Operation is only allowed if the national EMC regulations for the applica‐

tion are met.

●

The instructions for installation in accordance with EMC requirements

can be found in the section on EMC in the respective application docu‐

mentation.
The machine or installation manufacturer is responsible for compliance

with the limit values as prescribed in the national regulations.

●

The technical data, connection and installation conditions of the compo‐

nents are specified in the respective application documentations and

must be followed at all times.

National regulations which the user has to comply with
●

European countries: In accordance with European EN standards

●

United States of America (USA):
–

National Electrical Code (NEC)

–

National Electrical Manufacturers Association (NEMA), as well as

local engineering regulations

–

Regulations of the National Fire Protection Association (NFPA)

●

Canada: Canadian Standards Association (CSA)

●

Other countries:
–

International Organization for Standardization (ISO)

–

International Electrotechnical Commission (IEC)

3.2.3

Hazards by improper use

●

High electrical voltage and high working current! Danger to life or seri‐

ous injury by electric shock!

●

High electrical voltage by incorrect connection! Danger to life or injury by

electric shock!

●

Dangerous movements! Danger to life, serious injury or property dam‐

age by unintended motor movements!

DOK-INDRV*-KCU02+KSM02-PR03-EN-P

Bosch Rexroth AG

39/337

Rexroth IndraDrive Mi Drive Systems with KCU02 KSM02, KMS02/03, KMV03, KNK03

Safety instructions for electric drives and controls

LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01

Содержание Rexroth IndraDrive Mi





















































































































































































































































































































































Результаты поиска

Содержание Rexroth IndraDrive Mi

Отзывы:

Похожие инструкции для Rexroth IndraDrive Mi

Бренды по названию

Популярные бренды

Bosch Rexroth IndraDrive Mi, Руководство по планированию проекта

Результаты поиска

Содержание Rexroth IndraDrive Mi

Отзывы:

Похожие инструкции для Rexroth IndraDrive Mi

Бренды по названию

Популярные бренды