Bosch Plena Power Amplifier, Руководство по эксплуатации, Страница: 66 / 192

Voice Alarm Router
Voice alarm controller
Connect the voice alarm router to the voice alarm controller (see section Voice alarm routers,
page 51).
Loudspeakers
The voice alarm router has 6 zone outputs (Z1 to Z6). The procedure for connecting
loudspeakers to a voice alarm router is the same as the procedure for connecting
loudspeakers to a voice alarm controller (see section Loudspeakers, page 54).
Volume overrides
The voice alarm router has 6 override outputs; 1 for each connected zone. These are suitable
for 4‑wire override (24 V) and for 3‑wire override. The procedure for using volume override in
zones that are connected to a voice alarm router is the same as the procedure for using
volume override in zones that are connected to the voice alarm controller (see section Volume
overrides, page 56).
Trigger inputs
The voice alarm router has a terminal block to which 6 emergency (EMG) and 6 business
trigger inputs can be connected. Third party systems can use the trigger inputs to start
emergency and business calls in the Plena Voice Alarm System. The trigger inputs must be
configured with the configuration software. The procedure for connecting trigger inputs to a
voice alarm router is similar to the procedure for connecting trigger inputs to the voice alarm
controller (see section Trigger inputs, page 64).
5.2
5.2.1
5.2.2
5.2.3
5.2.4
66 en | Connection Plena
2013.07 | V2.0 | Installation and Operation manual Bosch Security Systems B.V.