manualshive.com logo in svg

Bosch Plena Power Amplifier, Руководство по эксплуатации, Страница: 13 / 192

Поделиться
Скачать
Bosch Plena Power Amplifier Скачать руководство пользователя страница 13

Voice Alarm Controller

The Voice Alarm Controller is the heart of the Plena Voice Alarm System. The voice alarm
controller distributes emergency calls, business calls as well as background music (BGM) to
up to 6 loudspeaker zones.

Figure 3.1: Voice Alarm Controller

Notice!
When the voice alarm controller has been purchased in the Asian-Pacific Region, the
emergency button has a different cover.

Hand-held microphone

The voice alarm controller is equipped with a hand-held microphone, which can be used to
make emergency calls.

Internal power amplifier

The voice alarm controller has a 240 W internal power amplifier, which can be used in
1‑channel or 2‑channel mode. In the 1‑channel mode, all calls and BGM are amplified by the
internal power amplifier. If desired, an external power amplifier can be connected for spare
switching. In the 2‑channel mode, the BGM is amplified by the internal power amplifier,
whereas the calls are amplified by an external power amplifier.

Internal message manager

The voice alarm controller has an internal message manager, which maps wave files (.wav) to
messages that can be played by the Plena Voice Alarm System.

Supervision

All necessary supervision features for compliance to evacuation standards are integrated into
the voice alarm controller. If supervision is enabled and a fault is detected, the voice alarm
controller lights a LED on its front panel that indicates the cause of the fault.

Trigger inputs

The voice alarm controller has a terminal block to which 6 emergency (EMG) and 6 business
trigger inputs can be connected. Third party systems can use the trigger inputs to start
emergency and business calls in the Plena Voice Alarm System.

3.2

3.2.1

3.2.2

3.2.3

3.2.4

3.2.5

Plena

System overview | en

13

Bosch Security Systems B.V.

Installation and Operation manual

2013.07 | V2.0 |

Содержание Plena Power Amplifier

































































































































































































Отзывы:

Нет отзывов