manualshive.com logo in svg

Bosch Plena Power Amplifier, Руководство по эксплуатации, Страница: 134 / 192

Поделиться
Скачать
Bosch Plena Power Amplifier Скачать руководство пользователя страница 134

Clause / Requirement

Compliance

Signature

 

3 time and date of each fault

occurrence.

 

 

 

4 details of the fault found and the

circumstances of it being found (for
example during routine
maintenance).

 

 

 

5 action taken to rectify or remedy.

 

 

 

6 date, time and name of person in

charge of the system.

 

 

 

7 countersignature of the responsible

person, if any faults occurred or have
been rectified.

 

 

 

7.3 Maintenance

 

 

 

7.3.1 General

 

 

There shall be an established and
documented procedure for the scheduled
maintenance and retesting of the sound
system and equipment as recommended by
the system designer in conjunction with
the equipment manufacturer and in
accordance with relevant international and
national standards. It is recommended that
a minimum of two scheduled maintenance
inspections, by a competent person, be
made each year. A responsible person (see
4.2) shall be nominated to ensure that the
procedure continues to be carried out
correctly.

Responsibility of the installer to
establish the maintenance
procedures using the
manufacturer documentation.

 

7.3.2 Maintenance instructions

 

 

A stiff-covered maintenance manual should
be available giving details of all work
required to maintain the installation and
equipment in proper working order,
consistent with specified performance
criteria and any other requirements of this
standard and other relevant international
or national standards. This should state
clearly:

Responsibility of the installer to
establish the maintenance
procedures using the
manufacturer documentation.

 

a The method of maintenance.

 

 

b Any sequence related to maintenance.

 

 

134 en | Appendices

Plena

2013.07 | V2.0 |

Installation and Operation manual

Bosch Security Systems B.V.

Содержание Plena Power Amplifier

































































































































































































Отзывы:

Нет отзывов