manualshive.com logo in svg

Bosch Plena Power Amplifier, Руководство по эксплуатации, Страница: 137 / 192

Поделиться
Скачать
Bosch Plena Power Amplifier Скачать руководство пользователя страница 137

Backward compatibility of the firmware

Firmware (f/w)
compatibility

Hardware (h/
w) / Version

Firmware (f/w) versions allowed

Units

 

2.16.04

2.16.05

2.16.07

3.00.01

3.00.02

Controller
LBB 1990/00

2.0

Yes

Yes

Yes

Yes

Yes

3.0

No

Yes*

Yes

Yes

Yes

Router
LBB 1992/00

2.0

Yes

Yes

Yes

No

Yes

3.0

Yes

Yes

Yes

Yes

Yes

(*): This software version does not recognize the latest version USB controller ISP1763.
 
Yes means, you can run the firmware in top row on the hardware version indicated. If you do
upgrade or downgrade, the controller will indicate faults, after up or downgrading you must
update the configuration. The configuration files are not backward compatible. You must
create a new configuration file and make sure you do not mix them up.
 
Part of EN54‑16 compliancy is to have a well documented system. This includes correct
naming and storing of configuration files.
 

Notice!
Firmware version 2.16.07 is identical to 2.16.05 except the handling of the USB controller IC.

The following f/w versions are available:
2.16.05, 2.16.07, 3.00.02.

Notice!
Router 2.0 h/w will need a hardware change to operate 3.00.02 f/w. This is not supported or
recommended.

 
Interoperability of the hardware

 

Controller

 
Router
 

-

2.0

3.0

2.0

OK

OK*

3.0

OK

OK

 

Controller/Router

>>>>>>>>>> 2.0/2.0

2.0/3.0

3.0/2.0

3.0/3.0

Amplifier

2.0

OK

OK

OK

OK

 

3.0

OK

OK

OK

OK

LBB 1995/00

2.0

OK

OK

OK

OK

LBB 1996/00

2.0

OK

OK

OK

OK

 

 

Plena

Appendices | en 137

Bosch Security Systems B.V.

Installation and Operation manual

2013.07 | V2.0 |

Содержание Plena Power Amplifier

































































































































































































Отзывы:

Нет отзывов