manualshive.com logo in svg

Bosch Plena Power Amplifier, Руководство по эксплуатации, Страница: 133 / 192

Поделиться
Скачать
Bosch Plena Power Amplifier Скачать руководство пользователя страница 133

Clause / Requirement

Compliance

Signature

A bound copy of the operational
instructions shall be provided.

Compliant. A printed version of
the English User Manual is
provided and electronic copies in
Dutch, French, German, Polish,
Norwegian, Finnish, Swedish,
Portuguese, and Spanish. The
Installation and User Instruction
are available electronically in
English. Responsibility of the
installer.

 

7.2 Records to be kept

 

 

Installation, logbook and maintenance
records shall be kept by the end-user
and/or maintenance company contracted
by the end-user in accordance with
relevant international and national
standards. These shall comprise as a
minimum:

Responsibility of the installer.

 

a Installation

 

 

 

1 details of the locations of all items of

the equipment.

Responsibility of the installer.

 

 

2 “as installed” performance

measurements of the system
including:

Responsibility of the installer.

 

 

  – measured loudspeaker loading

per circuit in emergency mode.

Responsibility of the installer.

 

 

  – settings of any adjustable items

within the system, including the
output level of power amplifiers.

Responsibility of the installer.

 

 

  – sound pressure levels.

Responsibility of the installer.

 

 

  – intelligibility measurements.

Responsibility of the installer.

 

b Log book

 

 

 

A stiff covered log book shall be kept, in
which all usage of the system and all
fault occurrences should be recorded,
together with all available automatically
produced records, to include:

Responsibility of the person
nominated by the person or
body, having control of the
premises (see 4.2).

 

 

1 dates and times of usage of the

system.

 

 

 

2 details of tests and routine checks

carried out.

 

 

Plena

Appendices | en 133

Bosch Security Systems B.V.

Installation and Operation manual

2013.07 | V2.0 |

Содержание Plena Power Amplifier

































































































































































































Отзывы:

Нет отзывов