BMW 8 Coupe Series, Руководство пользователя

Страница: 244 / 390

Camera
The camera lens is located in the handle strip of
the boot lid.
Dirt can impair the quality of the image. Clean the
camera lens if required.
Switching on/off
Switching on automatically
The system is automatically switched on if selec‐
tor lever position R is engaged while the engine
is running.
Automatic switching off when
moving forwards
The system switches off when a certain distance
or speed is exceeded.
Switch the system back on if necessary.
Depending on the equipment:
switching on/off manually
Press the Park Assistant button.
▷ On: the LED is illuminated.
▷ Off: the LED is extinguished.
The parking assistance functions are shown on
the Control Display.
Switching the view via iDrive
If the rear-view camera view is not displayed,
change the view via iDrive:
1. If necessary, tilt the Controller to the left.
2. "Rear view camera"
The image from the rear-view camera is shown.
Operating requirements
▷ The rear-view camera is switched on.
▷ The boot lid is completely closed.
▷ Keep the detection area of the camera clear.
Projecting loads or carrier systems that are
not connected to a trailer socket can restrict
the detection area of the camera.
Assistance functions
General
A number of assistance functions can be active
simultaneously.
The assistance functions can be activated man‐
ually.
1. If necessary, tilt the Controller to the right.
2. With the corresponding equipment:
"Camera picture"
3. ▷
"Parking guidance lines".
Driving path lines and turning circle lines
are shown, see page
245 .
▷ "Obstacle marking".
Depending on the equipment, the obsta‐
cles detected by Park Distance Control
PDC are displayed, see page
245 , by
markings.
Seite 244
CONTROLS
Driver Assistance Systems
244
Online Edition for Part no. xxx - VI/18