BMW 8 Coupe Series, Руководство пользователя

Страница: 250 / 390

Flank protection
Principle
The system warns about obstacles at the side of
the vehicle.
Display
Obstacle markings are displayed at the sides of
the vehicle to protect the vehicle's flanks.
▷ No markings: no obstacles have been detec‐
ted.
▷ Coloured markings: warning that obstacles
have been detected.
Limits of the flank protection
The system only shows stationary obstacles that
were previously detected by the sensors when
driving past.
The system does not detect whether an obstacle
subsequently moves. As a result, the markings in
the display are no longer shown at standstill after
a particular length of time. The area next to the
vehicle must be detected again.
Door opening angle
Principle
If obstacle marking is activated, the system
shows any fixed, stationary obstacles that are re‐
stricting the opening angle of the doors.
The system does not issue warnings about ap‐
proaching road users.
In selector lever position P, the maximum open‐
ing angles of the doors are shown.
As soon as the vehicle moves, the parking assis‐
tance lines are displayed instead of the opening
angles.
Limits of the display
For technical reasons, the display of the area
around the vehicle is distorted.
Even if the symbols for the door opening angles
on the Control Display are not covering any other
objects, pay attention to the following when park‐
ing beside other objects:
The perspective means that protruding objects
at a higher level may be closer than they appear
on the Control Display.
Panorama View
Principle
The system provides you with an advance view
of crossing traffic at blind exits and junctions.
Seite 250
CONTROLS
Driver Assistance Systems
250
Online Edition for Part no. xxx - VI/18