BMW 8 Coupe Series, Руководство пользователя

Страница: 223 / 390

Resuming Cruise Control
If Cruise Control is interrupted, it can be resumed
by calling up the saved speed.
Before calling up the saved speed, make sure
that the difference between the current speed
and the saved speed is not excessively large.
Otherwise, there may be inadvertent braking or
acceleration.
While the system is interrupted, press
the button.
Cruise Control is resumed with the saved values.
The saved speed value is deleted and can no
longer be called up in the following instances:
▷ When the system is switched off.
▷ When drive-ready state is switched off.
Displays in the instrument
cluster
Display in the speedometer
▷ Green indicator: system is ac‐
tive, the indicator shows the
desired speed.
▷ Grey mark: system is interrup‐
ted; the mark shows the
stored speed.
▷ No marker: system is switched off.
Indicator lamp
▷ Green indicator lamp: the system is
active.
▷ Grey indicator lamp: the system is in‐
terrupted.
▷ No indicator lamp: the system is switched off.
Displays in the Head-Up Display
Some information from the system can also be
shown in the Head-Up Display.
The symbol is displayed when the de‐
sired speed set has been reached.
System limits
The desired speed is also maintained on a down‐
hill stretch. The vehicle may drive slower than the
desired speed on uphill gradients if the engine
power is not sufficient.
In ECO PRO drive mode, it is possible that the
vehicle will drive faster or slower than the desired
speed setting in some situations, for example on
downward or upward gradients.
Active Cruise Control with
Stop & Go ACC
Principle
This system allows you to set a desired speed
and a desired distance from the vehicle in front,
using the buttons on the steering wheel.
When the road ahead is clear, the system main‐
tains the desired speed by braking or accelerat‐
ing the vehicle automatically, as required.
If there is a vehicle driving in front, the system
adapts your own vehicle's speed in order to
maintain the set distance from the vehicle ahead.
The speed is adapted as far as the given situa‐
tion allows.
General
A radar sensor is fitted in the front bumper and a
camera on the rear-view mirror for detecting ve‐
hicles driving in front.
Depending on the vehicle setting, the character‐
istics of Cruise Control may change in certain
areas, for example acceleration in ECO PRO
drive mode is less pronounced.
The distance can be set in several stages, and is
dependent on the individual speed for reasons of
safety.
Seite 223
Driver Assistance Systems
CONTROLS
223
Online Edition for Part no. xxx - VI/18