BMW 8 Coupe Series, Руководство пользователя

Страница: 83 / 390

If a driver profile, see page 98 , has been as‐
signed to the lost remote control, the connection
to this remote control must be removed. A new
remote control can then be assigned to the
driver profile.
Malfunction
General
A Check Control message, see page 148 , is
shown.
It may be difficult for the vehicle to detect the re‐
mote control in some conditions, including the
following:
▷ The battery of the remote control is dis‐
charged. Replacing the battery, see page
82 .
▷ Disruption of the radio link by transmission
masts or other equipment transmitting pow‐
erful signals.
▷ Shielding of the remote control by metallic
objects.
Do not transport the remote control together
with metallic objects.
▷ Disruption of the radio link by mobile tele‐
phones or other electronic devices in the im‐
mediate vicinity of the remote control.
Do not transport the remote control together
with electronic devices.
▷ Interference with the radio transmission
caused by the charging of mobile devices, for
example a mobile phone.
▷ The remote control is located in the immedi‐
ate vicinity of the wireless charging dock.
Place the remote control somewhere else.
If there is a malfunction, the vehicle can be un‐
locked and locked from the outside with the
integrated key, see page
87 .
Switching on drive-ready state via
the remote control special ID feature
The drive-ready state cannot be switched on if
the remote control has not been detected.
If this happens, proceed as follows:
1. Hold the back of the remote control against
the mark on the steering column. Pay atten‐
tion to the display in the instrument cluster.
2. If the remote control is detected:
Switch on drive-ready state within 10 sec‐
onds.
If the remote control is not detected, change the
position of the remote control slightly and repeat
the procedure.
BMW display key
General
The BMW display key is supplied with an addi‐
tional mechanical key. When using the display
key, you should also carry the mechanical key,
for example in your wallet or purse. The mechan‐
ical key is used in the same way as the
integrated key, see page
87 .
The display key supports all functions of the
standard remote control.
The following functions are also available:
▷ Call up status of doors and windows.
▷ Call up status of the anti-theft alarm.
▷ Call up service information.
▷ Call up range with the available fuel.
Seite 83
Opening and closing
CONTROLS
83
Online Edition for Part no. xxx - VI/18