BMW 8 Coupe Series, Руководство пользователя

Страница: 187 / 390

The driver must intervene personally if there is
an acute warning. If necessary, the system can
assist by braking the vehicle automatically if
there is a risk of a collision.
An acute warning can be triggered even without
a previous advance warning.
Brake intervention
The warning prompts the driver to intervene ac‐
tively.
The system can also assist by braking the vehi‐
cle automatically if there is a risk of a collision.
The vehicle can be braked until it comes to a
stop.
The brakes are only applied if driving stability has
not been impaired, for example by deactivation of
Dynamic Stability Control DSC.
Braking can be discontinued either by depress‐
ing the accelerator pedal or by actively moving
the steering wheel.
The detection of objects may be limited. Take
into account the detection range limits and the
functional limitations.
System limits
Safety note
WARNING
The system may not respond at all, or may re‐
spond too late, incorrectly or without justifica‐
tion due to limits of the system. There is a dan‐
ger of accidents or damage to property.
Observe the information on the system limits
and intervene actively if necessary.
Upper speed limit
The system reacts to crossing vehicles if your
own speed is below approx. 80 km/h, 50 mph.
Detection range
The detection ability of the system is limited.
For this reason, the system may fail to respond
or only respond after a delay.
It is possible that the following are not detected,
for example:
▷ Crossing vehicles concealed by buildings, for
example.
▷ Vehicles suddenly cutting in or braking heav‐
ily.
▷ Crossing two-wheeled vehicles.
▷ Vehicles with an unusual side appearance.
Functional limitations
The system may have limited functionality in the
following situations, for example:
▷ In thick fog, wet conditions or snow.
▷ On sharp bends.
▷ When Driving Stability Control Systems are
limited or deactivated, for example DSC OFF.
▷ If the field of view of the camera or the wind‐
screen in front of the rear-view mirror is soiled
or covered.
▷ If the camera has overheated due to exces‐
sively high temperatures and has been tem‐
porarily deactivated.
▷ If the radar sensors are soiled or covered.
▷ Up to 10 seconds after starting the engine
using the start/stop button.
▷ During the camera calibration process imme‐
diately after vehicle delivery.
Seite 187
Safety
CONTROLS
187
Online Edition for Part no. xxx - VI/18