BMW 8 Coupe Series, Руководство пользователя

Страница: 49 / 390

Observe the following to ensure that the vehi‐
cle is secured against rolling away:
▷ Apply the parking brake.
▷ Turn the front wheels towards the kerb on
upward or downward gradients.
▷ Additionally secure the vehicle on upward
or downward gradients, for example with a
chock.
NOTE
Repeated start attempts or starting several
times in quick succession means that fuel is
not burned or is inadequately burned. The cata‐
lytic converter can overheat. There is a danger
of damage to property. Avoid repeatedly start‐
ing in quick succession.
Switching on drive-ready state
Principle
Drive-ready state is switched on
using the start/stop button:
Steptronic transmission
1. Depress the brake pedal.
2. Press the start/stop button.
The starting process is activated automatically
for a short time and stops as soon as the engine
starts.
Most of the indicator and warning lamps in the
instrument cluster are illuminated for different
lengths of time.
Diesel engine
With the engine cold and at temperatures below
0 ℃, approximately 32 ℉ the starting operation
can be delayed slightly due to automatic pre‐
heating.
A Check Control message is shown.
Petrol engine
Depending on the engine version, full drive
power may only be available approx. 30 seconds
after starting the engine. In this case, the vehicle
will not accelerate in the usual way.
Display in the instrument cluster
When drive-ready state is switched on, the revo‐
lution counter shows the current engine speed.
Switching off drive-ready state
Steptronic transmission
1. With the vehicle at a standstill, engage selec‐
tor lever position P.
2. Press the start/stop button.
The engine is switched off. The vehicle
changes to standby state.
3. Apply the parking brake.
Seite 49
Vehicle operating state
CONTROLS
49
Online Edition for Part no. xxx - VI/18