BMW 8 Coupe Series, Руководство пользователя

Страница: 213 / 390

Harder vehicle braking
In certain situations, it may be necessary to bring
the vehicle to a standstill more quickly.
To do this, for a short time the braking pressure
applied when stepping on the brake pedal must
be higher than the braking pressure achieved by
the automatic braking function. This action inter‐
rupts the automatic braking process.
Cancelling automatic braking
In certain situations, it may be necessary to can‐
cel automatic braking, for example for an evasive
manoeuvre.
Cancel automatic braking:
▷ By depressing the brake pedal.
▷ By depressing the accelerator pedal.
Attentiveness assistant
General
The system can detect decreasing attentiveness
or the onset of fatigue in the driver on long mo‐
notonous journeys, for example on motorways. In
this situation, it is recommended that you take a
break.
Safety note
WARNING
The system does not relieve you of your per‐
sonal responsibility to assess your physical
condition correctly. Increasing inattention or fa‐
tigue might not be detected, or may not be de‐
tected in good time. There is a danger of acci‐
dents. Make sure that the driver is rested and
alert. Adapt your driving style to the traffic con‐
ditions.
Function
The system is switched on every time drive-
ready state is switched on.
After commencement of the journey, the system
adapts to the driver so that an decrease in atten‐
tion or fatigue can be detected.
This process considers the following criteria:
▷ Personal driving style, for example, steering.
▷ Driving conditions, for example, time of day,
duration of journey.
▷ Depending on the equipment: attention of
the driver with a Driver Attention Camera, for
example head position.
The system is active from approx. 70 km/h,
43 mph and can also display a recommendation
to take a break.
Recommendation to take a break
Adjusting
The attentiveness assistant is automatically ac‐
tive every time drive-ready state is switched on
and can thus display break recommendations.
Break recommendations can also be switched
on or off and adjusted via iDrive.
Via iDrive:
1. "CAR"
2. "Settings"
3. "General settings"
4. "Break recommendation"
5. Select the desired setting:
▷ "Off": no break recommendation is is‐
sued.
▷ "Standard": the break recommendation is
issued with a defined value.
▷ "Sensitive": the break recommendation is
issued earlier.
Seite 213
Safety
CONTROLS
213
Online Edition for Part no. xxx - VI/18