manualshive.com logo in svg

Black Box ACX048, Руководство пользователя, Страница: 70 / 228

Поделиться
Скачать
Black Box ACX048 Скачать руководство пользователя страница 70

Page 70

724-746-5500   |   blackbox.com

 

Chapter 2: Overview 

2.10 System Check

The System Check offers a diagnostic function for checking your current matrix 
configuration. The purpose of this feature is to find suboptimal and faulty settings.

The System Check is exclusively used for a plausibility check and does not make 
any active changes in the configuration.

You have the following option to access the menu:

Figure 2-58.

The following configuration parts are checked:

• Matrix Firmware

• Extender Firmware

• Multi-Screen Control

• Ext Units

• CPU Devices

• CON Devices

• User

• System Configuration

The following notification levels can be shown:

Table 2-55. Notification levels.

Level

Description

OK (green) System check completed without any abnormalities.
WARNING 
(yellow)

System check revealed (without being system critical)  
incomplete parts of the configuration, firmware differences,  
duplications, or not connected extenders.

Error (red)

System check revealed errors in the configuration that can have 
both functional and system critical influences on the system.

Содержание ACX048





































































































































































































































Отзывы:

Нет отзывов