Black Box ACX048 Скачать руководство пользователя страница 132

Страница: 132 / 228

Page 132

724-746-5500 | blackbox.com

Chapter 4: Configuration

You have the following options to configure the extenders:

Figure 4-46.

OSD

• Select Configuration > EXT Units in the main menu.

Figure 4-47. Menu Configuration – EXT Units.

1. To configure a USB 2.0 extender unit, press the “New” button. An extender

with an eight-digit ID will be created, starting with digit 9.

2. Assign an appropriate name to the extender in the Name field.

3. Enter the port number of the matrix physically connected to the USB 2.0

extender unit into the Port field.

4. To configure the created extender as a CON Unit, set the USB-CON

(standalone) option to Y (C#1 in the Input Signals column) and confirm by
pressing the “OK” button.

5. To configure the created extender as a CON Unit, set the USB-CPU (standalone)

Содержание ACX048





































































































































































































































Результаты поиска

Содержание ACX048

Отзывы:

Black Box ACX048, Руководство пользователя, Страница: 132 / 228

Результаты поиска

Содержание ACX048

Отзывы: