manualshive.com logo in svg

Black Box ACX048, Руководство пользователя, Страница: 173 / 228

Поделиться
Скачать
Black Box ACX048 Скачать руководство пользователя страница 173

Page 173

724-746-5500   |   blackbox.com

 

Chapter 4: Configuration

Administration of Settings

Within a Matrix Grid, there is a difference between settings that have to be made 
locally for each matrix and settings that can be made globally so that they are 
valid for the whole Matrix Grid.

The settings in the following menus have to be made separately for each matrix or 
within the master matrix in order to affect all matrices in the Grid:

System, Access, Switch, Network, Date + Time, SNMP, Matrix Grid,  
Multi-Screen Control

The settings in the following menus have to be made globally and only once  
within the Matrix Grid:

EXT Units, CPU Devices, CON Devices, User, CON Macros, User Macros, 
CON Favorites, User Favorites, Virtual CPU Devices, Virtual CON Devices.

NOTE:  If global settings are made in the respective menus, they will be  

immediately available on each matrix within the Matrix Grid.

General Preparation

The following requirements have to be fulfilled before starting the Matrix Grid 
configuration:

1.  The Matrix Grid function (Bundle 4) must be activated on all matrices to be 

connected to the Grid by a license key. Bundle 4 is the Black Box part number 
ACX-CAS and will need to be activated.

2. 

Firmware V3.00

 must be installed on all matrices to be connected to the Grid.

3.  All matrices to be connected to the Grid must be within the same TCP/IP  

network.

4.  The port 5556 needed for network communication must not be blocked by a 

firewall.

OSD

To configure a Matrix Grid, proceed as follows. The following configuration steps 
have to be repeated for each matrix separately:

• Select Configuration > System in the main menu.

Содержание ACX048





































































































































































































































Отзывы:

Нет отзывов