manualshive.com logo in svg

Black Box ACX048, Руководство пользователя, Страница: 168 / 228

Поделиться
Скачать
Black Box ACX048 Скачать руководство пользователя страница 168

Page 168

724-746-5500   |   blackbox.com

 

Chapter 4: Configuration

Figure 4-84. Menu File–Import screen.

4.12 Matrix Cascading

This simple method of cascading allows a switchable connection between two 
matrices via “Tie Lines.”

The Matrix Cascading does not require Bundle 4. (Bundle 4 is the ACX-CAS 
license.)

This kind of configuration may become necessary if the number of ports in the 
entire system has to be increased or if certain important connections should be 
distributed to several matrices because of redundancy.

The Tie Lines are unidirectional and can only be used in one direction according to 
their configuration. For a bidirectional cascading, you have to configure opposite 
Tie Lines.

To connect Tie Lines to the matrices, you have to create intended Master/Slave 
CON und Master/Slave CPU Devices to be switched within the cascaded  
environment.

You have the following options to configure Matrix Cascading:

Figure 4-85.

Содержание ACX048





































































































































































































































Отзывы:

Нет отзывов