Black Box ACX048 Скачать руководство пользователя страница 165

Страница: 165 / 228

Page 165

724-746-5500 | blackbox.com

Chapter 4: Configuration

2. Select the directory of the configuration on your storage medium where it will

be saved.

NOTE: Configurations are always saved in a file ending “dtc.”

Figure 4-80. Menu File—Save As screen.

4.10.5 Loading of Configurations (External)

Externally saved configurations are opened and activated in this menu.

You have the following possibilities to load configurations from files:

1. Select “File > Open…” during off-line mode and select the storage location of

the configuration file that has to be opened.

2. Open the configuration by pressing the “Open” button.

3. Select “File > Upload to…” in the menu bar to transfer the opened

configuration to the matrix. Enter the necessary parameters.

4. Select “Matrix > Connect” in the menu bar to make a connection between the

matrix and the Java tool. Enter the necessary parameters.

5. Select “Administration > Activate Configuration” and select the configuration

to be activated.

Содержание ACX048





































































































































































































































Результаты поиска

Содержание ACX048

Отзывы:

Black Box ACX048, Руководство пользователя, Страница: 165 / 228

Результаты поиска

Содержание ACX048

Отзывы: