Black Box ACX048 Скачать руководство пользователя страница 65

Страница: 65 / 228

Page 65

724-746-5500 | blackbox.com

Chapter 2: Overview

Figure 2-54. Monitoring Menu—Syslog.

Logging system activities start when opening the Monitoring menu, and remain
active until the appropriate tab is closed.

NOTE: Syslog messages are transmitted via UDP. Therefore, Port 514 within the

used network should not be blocked, e.g., by a firewall.

During logging, the activities are written continuously into logging files and stored
locally. This process can be set with various options.

Options

Select Extras > Options in the menu bar and open the Syslog tab.

The following options are available:

Table 2-52. Syslog options.

Option

Description

Log File Directory

Default directory to store the log files.

Log File Name

Default name of the log file to be saved.

Log File Extension

Default extension for the log file.

Maximum Log File Size (KB)

Allowed maximum size of a log file.

Maximum Number of Log Files

Allowed maximum number of log files.

Содержание ACX048





































































































































































































































Результаты поиска

Содержание ACX048

Отзывы:

Black Box ACX048, Руководство пользователя, Страница: 65 / 228

Результаты поиска

Содержание ACX048

Отзывы: