manualshive.com logo in svg

Black Box ACX048, Руководство пользователя, Страница: 154 / 228

Поделиться
Скачать
Black Box ACX048 Скачать руководство пользователя страница 154

Page 154

724-746-5500   |   blackbox.com

 

Chapter 4: Configuration

For an efficient macro configuration, the following context functions are available:

•  Right-click on the “Macros” tab to assign macros to other consoles by using the 

“Assign Macros to ...” function. Copy macros from other consoles by using the 
“Copy Macros from ....” section.

•

   Right-click on the macro list to copy macros of the selected key into the cache 

by using the “Copy Key Macros” function. You can paste the macros from the 
cache into a key by using the “Paste Key Macros” function and you can reset 
all macros of the selected key by using the “Reset Key Macros” function.

4.9.6 Parallel Operation

This section explains how to configure the parallel operation of a CPU Device by 
two or more CON Devices. Only one CON Device at a time can control the CPU 
Device, but the CPU device can be taken over exclusively by other CON Devices, 
too. Taking over control is immediately possible or after the controlling CON 
Device’s inactivity timer of the expires. You can use the mouse or keyboard to 
take over control.

NOTE:  To allow a smooth and accurate function of the parallel operation, you 

should use identical mice and keyboards. They should be connected to the 
same USB-HID ports of each CON Unit.

The alternative is using the USB-HID Ghosting (see Chapter 5, Page 203).

You have the following options to configure parallel operation:

Figure 4-67.

Содержание ACX048





































































































































































































































Отзывы:

Нет отзывов