manualshive.com logo in svg

Black Box ACX048, Руководство пользователя, Страница: 21 / 228

Поделиться
Скачать
Black Box ACX048 Скачать руководство пользователя страница 21

Page 21

724-746-5500   |   blackbox.com

 

Chapter 2: Overview

2. Overview
2.1 Description
2.1.1 Application

The ServSwitch DKM FX is used to establish connections from consoles (monitor, 
keyboard, mouse, and other peripheral devices) to various sources (computer, 
CPU). In a maximum configuration, up to 288 independent ports can be defined 
and switched either as a console or a CPU.

The ServSwitch DKM FX Compact is used to establish connections from consoles 
(monitor, keyboard, mouse, and other peripheral devices) to various sources  
(computer, CPU). In a maximum configuration, up to 8 (using the ACXC8 or 
ACXC8F), 16 (using the ACXC16), 32 (using the ACXC32), 48 (using the 
ACXC48), 48 CATx ports/16 SFP slots (using the ACXC48F16), or 48 CATx 
ports/32 SFP slots (using the ACXC48F32), 64 CATx (using the ACXC64), or 80 
CATx (using the ACXC80) independent ports can be defined and switched either 
as a console or a CPU.

The ServSwitch DKM FX or FXC is mainly specified for the use with extenders that 
are able to transmit video, KVM, and USB 2.0 signals. You can also use it as a  
video-only matrix.

For the connection between the ServSwitch DKM FX or FXC and the peripheral 
devices, such as KVM extenders or video sources, you can use CATx, fiber, or 
coaxial cables, depending on the hardware used.

The ServSwitch DKM FX serves as a repeater. You can place it up to 6.2 miles  
(10 km) from the consoles and 6.2 miles (10 km) from the sources.

Содержание ACX048





































































































































































































































Отзывы:

Нет отзывов