manualshive.com logo in svg

Black Box ACX048, Руководство пользователя, Страница: 2 / 228

Поделиться
Скачать
Black Box ACX048 Скачать руководство пользователя страница 2

Page 2

724-746-5500   |   blackbox.com

 

Trademarks Used in this Manual

Trademarks Used in this Manual

Black Box and the Double Diamond logo are registered trademarks, and 
ServSwitch is a trademark, of BB Technologies, Inc.

Mac is a registered trademark of Apple Computer, Inc.

IBM is a registered trademark of International Business Machines Corporation.

Java is a registered trademark of Oracle Corporation.

TOSLINK is a registered trademark of Toshiba Corporation.

Any other trademarks mentioned in this manual are acknowledged to be  
the property of the trademark owners.

NOTE:  The ServSwitch DKM FX and the ServSwitch DKM FX Compact function in 

similar ways. The difference between them is described in the table below.

Table 1. ServSwitch DKM FX and DKM FX Compact comparison.

ServSwitch DKM FX Compact

ServSwitch DKM FX

Number of Ports

8-, 16-, 32-, 48-, 64-, 80-port options

48-, 80-, 160-, 288-port options

Type of Ports

CATx/Fiber

CATx/fiber I/O ports dependent on I/O card

Form Factor

Small form factor (1/2U)

Large form factor (4U+)

Modular or Not

Not modular

Modular

Disclaimer

Black Box Network Services shall not be liable for damages of any kind, including, 
but not limited to, punitive, consequential or cost of cover damages, resulting 
from any errors in the product information or specifications set forth in this docu-
ment and Black Box Network Services may revise this document at any time with-
out notice.

Содержание ACX048





































































































































































































































Отзывы:

Нет отзывов