manualshive.com logo in svg

Black Box ACX048, Руководство пользователя, Страница: 153 / 228

Поделиться
Скачать
Black Box ACX048 Скачать руководство пользователя страница 153

Page 153

724-746-5500   |   blackbox.com

 

Chapter 4: Configuration

Devices) for the selected macro command.

5.  Confirm your inputs by pressing the <Enter> key and repeat the process for 

further macro commands, if necessary.

Java Tool

In the working area of the “Definition > CON Devices” menu, select the console 
for which a console macro has to be created and open the “Macros” tab.

Figure 4-66. Menu Definition - CON Devices

To create a macro for the selected console, proceed as follows:

1. Select the number key (1-16) for which a macro has to be created.

2.  In the “Function” column, select the commands that should be part of the 

macro. Open the selection list by double-clicking on the empty fields.

3.  In the P1 and P2 columns, select the respective parameters for the macro  

functions (for example, corresponding consoles and CPUs).

4. To confirm your inputs, press the “Apply”  button.

Содержание ACX048





































































































































































































































Отзывы:

Нет отзывов