manualshive.com logo in svg

Black Box ACX048, Руководство пользователя, Страница: 11 / 228

Поделиться
Скачать
Black Box ACX048 Скачать руководство пользователя страница 11

Page 11

724-746-5500   |   blackbox.com

 

Chapter 1: Specifications

1. Specifications

1.1 Interfaces

1.1.1 DVI-D Single Link

The video interface supports the DVI-D protocol. All signals that comply with 
DVI-D single-link standard can be transmitted. This includes, for example, monitor 
resolutions such as 1920 x 1200 @ 60 Hz, Full HD (1080p), or 2K HD (up to 2048 
x 1152). Data rate is limited to 165 MPixel/s.

1.1.2 USB HID

Devices with USB HID interface support a maximum of two devices with  
USB HID protocol. Each USB HID port provides a maximum current of 100 mA.

Keyboard

The DKM FX or FXC is compatible with most USB keyboards. Certain keyboards 
with additional functions may require custom firmware to operate. Keyboards with 
an integral USB Hub (Mac

®

 keyboards, for example) are also supported, but you 

cannot use more than two active USB HID devices on the DVI and USB HID cards.

Mouse

Compatible with most 2-button, 3-button, and scroll mice.

Other USB HID devices

The proprietary USB emulation also supports certain other USB HID devices, such 
as specific touchscreens, graphics tablets, bar-code scanners, or special keyboards. 
Support cannot be guaranteed, however, for every USB HID device.

NOTE:  Only two USB HID devices are supported concurrently, such as keyboard 

and mouse or keyboard and touchscreen. A hub is allowed, but it does not 
increase the number of HID devices allowed.

To support other USB “non-HID” devices, such as scanners, Web cams or memory 
devices, choose our devices with transparent USB support.

1.1.3 RJ-45 (Network)

CATx device communication requires a 1000BASE-T connection. Pin the cable 
according to EIA/TIA-568-B (1000BASE-T) standard with RJ-45 connectors at both 
ends. All four wire pairs are used in both directions. The cabling is suitable for  
full-duplex operation. For the cable connection to a source (computer, CPU), use a 
cross-pinned network cable.

Содержание ACX048





































































































































































































































Отзывы:

Нет отзывов