manualshive.com logo in svg

Black Box ACX048, Руководство пользователя, Страница: 125 / 228

Поделиться
Скачать
Black Box ACX048 Скачать руководство пользователя страница 125

Page 125

724-746-5500   |   blackbox.com

 

Chapter 4: Configuration

4.5.3 User Macros

User macros can be created to switch or disconnect CON units to CPU units, using 
different access rights. The macro commands are created for each user or CON 
separately.

A macro can execute up to 16 switching commands successively.

You will use hotkeys and the function keys <F1>-<F16> to  execute the  
macros.

NOTE: To execute user macros, the user has to be logged in at the matrix.

You can select between the following settings:

Table 4-27. Settings.

Field

Selection

Description

Function (01–06)

Connect,  
(P1 = CON, P2 = CPU)

Set bidirectional connection from console P1 to CPU P2.

Connect Video,  
(P1 = CON,  P2 = CPU)

Set video connection from console P1 to CPU P2.

Disconnect (P1=CON)

Disconnect console P1.

Logout User

Logout current user.

Set Real CPU  
(P1 = VCPU, P2 = RCPU)

Assign a virtual CPU to  a real CPU.

Set Virtual CON  
(P1 = RCON, P2 = VCON)

Assign a real console to a virtual console.

Push (P1 = CON)

The individual KVM connection is forwarded to console 
P1 and is changed to a video-only connection.

Push Video (P1 = CON)

The video signal of the current connection (KVM or video 
only) is forwarded to console P1. The individual connec-
tion remains unchanged (KVM or video only).

Get (P1 = CON)

The individual console gets a video-only connection to 
the CPU that is currently connected to console P1. The 
connection of console P1 remains unchanged (KVM or 
video only).

P1

CON or CPU Device

Name of CON or CPU device.

P2

CPU or CON Device

Name of CON or CPU device.

Содержание ACX048





































































































































































































































Отзывы:

Нет отзывов