411829-L, Operation
April 2012
Page 4-32
4
4.11 Solvent and Waste Handling
4.11.1 Assign Solvents to the Solvent Inlets
When a purification is run, the software references the solvent assignments to determine which
solvent inlets that are connected to the solvents used in the method.
1. Select the
Solvents
tab in the right-hand panel.
2. Select the
Instrument Solvents
tab.
Figure 4-26. Solvents Tab (Isolera Four Shown)
3. Press one of the
Solvent
text boxes.
4. Select the solvent that you want to assign to the selected inlet. To scroll the list down or up,
press and . The software comes with a preconfigured list of solvents and their parameters.
You may add other solvents to this list (press
New...
) and edit user defined solvents (select the
solvent and press
Edit...
).
5. If solvent monitoring is enabled, select the
Capacity
text box and enter the capacity of the
solvent reservoir.*
6. If solvent monitoring is enabled, select the
Current
text box and enter the current solvent level
of the reservoir.*
7. Repeat step 3 through 6 for all solvent inlets.
*
These values are used by the system to track reservoir capacity. To enable this feature, see “Enable or
Disable Monitoring of Reservoirs” on page 3-9.
4.11.2 Set the Reservoir Volumes
If the monitoring of solvent and/or waste levels is enabled (see “Enable or Disable Monitoring of
Reservoirs” on page 3-9), you have to enter the capacities and current fluid levels for the solvent
and waste reservoirs each time you empty a waste reservoir or replenish a solvent.
1. Select the
Solvents
tab in the right-hand panel.
2. Select the
Instrument
Solvents
tab.
3. Enter the capacity of a reservoir by pressing the applicable
Capacity
text box.
4. Enter the current level of a reservoir by pressing the applicable
Current
text box.
Содержание Isolera Four
Страница 1: ...Isolera User Manual...
Страница 66: ...411829 L Operation April 2012 Page 4 16 4 Figure 4 10 Tube Connections...
Страница 114: ......
Страница 115: ......