background image

411829-L, Operation

April 2012

Page 4-23

4

4.7  Monitor and Control a Purification

4.7.1 Monitor the Purification in Progress

Select the 

Status

 tab in the right-hand panel. While a purification is running, one graph displays 

the programmed gradient and the other a dynamic chromatogram. If a Spektra license has been 
installed on your system, an absorbance spectrum for the whole detector range can be viewed in 
the gradient view by pressing the 

Show 

λ

 button. The gradient is then displayed in the 

chromatogram.

You can adjust the chromatogram view by using the following buttons:

Zoom:

 When enabled ( ), you can select a region of the chromatogram to magnify (zoom in).

Drag:

 When enabled ( ), you can drag the chromatogram to the desired position.

Scroll:

 When enabled ( ), the present r1 CV and -3 CV is shown on the horizontal axis.

Full:

 When enabled ( ), all readings on the horizontal axis are shown.

Length Unit:

 Toggle the horizontal axis unit between CV, minutes, and milliliter.

UV Zero:

 Used to set the current UV level to 0 (zero) AU.

Figure 4-18. Status Tab (Isolera LS and Isolera Four EXP 

with Spektra License Shown)

Cartridge Status and Color Legends

See page 1-13 for a description of the colors used in the tray overview, chromatogram, gradient 
graph, and absorbance spectrum (requires a Spektra license).

See page 1-12 for a list of the different status of a cartridge.

4.7.2 Bypass the Automatic UV Lamp Warm-up Period

You can bypass the automatic UV lamp warm-up period by pressing 

Skip Warm Up

 in the right-

hand panel. However, if the UV lamp has not reached operating temperature, purification results 
may not be optimal.

4.7.3 End Initial Waste and Start Collecting Fractions

If you want to end an Initial Waste phase prematurely and start collecting fractions, press 

Start 

Collect 

at the 

Status

 tab.

Содержание Isolera Four





















































































































Отзывы: