Biotage Isolera Four, Руководство пользователя

Страница: 79 / 116

411829-L, Operation April 2012 Page 4-29
4
4.9.2 View, Print, and Save Reports on a USB Memory Device or the
Network
Two result reports are available for each purification: 1) an archive report with purification details, a
chromatogram, a 3D absorbance spectrum for the whole detector range (requires a Spektra
license), and TLC data (if entered in the TLC to Step Gradient editor) and 2) a fraction report. These
reports can be printed to a network printer with postscript support or a local USB printer and saved
as PDF files on a USB memory device or in a share folder on your network.
1. Select the Results tab in the right-hand panel.
2. Select the desired record at the Result Selection tab. (If the record is not listed, see “Search
for Records” above.) An archive report with purification details, a chromatogram, a 3D
absorbance spectrum for the whole detector range (requires a Spektra license), and TLC data
(if entered in the TLC to Step Gradient editor) for the selected record is available at the
Archive Report tab and a fraction report is available at the Fraction Report tab.
3. To view a 2D and 3D absorbance spectrum for the whole detector range (requires a Spektra
license):
a. Press λ ... at the Report Setup tab. The Spectrum dialog opens.
b. To enable or disable baseline correction, press Correct Baseline . When enabled ( ), the
maximum solvent absorbance spectrum is subtracted from the signal presented by the
detector.
Figure 4-23. 2D Absorbance Spectrum
Drag this line to another position to show the absorbance spectrum at that time.
Drag one or both of these lines to other wavelengths to show the chromatogram at
those wavelengths.