Bionet CardioTouch3000, Руководство по эксплуатации

Страница: 27 / 120

27 / 120
E3KOM-7.00
CardioTouch3000 Operation Manual
6
) System Installation
Precautions for Installation
While installing CardioTouch3000, please pay attention to the following items:
- Use the equipment between the ambient temperature 5 to 40
℃
and humidity 10 - 90
％
.
- Check the power cord is properly connected, and the probe carefully handled.
- Do not plug multiple cords in a power outlet.
- Install and operate unit on a flat surface.
- If you experience noise, ground the device.
- Do not use a power cord that may make a connection noise.
- Device settings will be recorded in the internal memory even when it is off.
- Prevent any shock or excessive force that may cause damage to the device.
- Place the device away from any dust or flammable materials.
Power Connection
The equipment needs electrical power to operate. Plug in one end of the power cable
to wall socket and the other to CardioTouch3000.
Patient Cable Connection
- Connect the patient cable to the patient cable connection port on the right side of the
body.
- Connect limb electrodes to RL (N), LL (F), RA(R), and LA (L) leads of the patient cable and
chest electrodes to V1 (C1), V2 (C2), V3 (C3), V4 (C4), V5 (C5), and V6 (C6), respectively.
Paper Installation
- Push the printer cover release switch to the right to open the printer door of the
CardioTouch3000. Install EKG paper with the side to be recorded appearing on top. Close
the cover to finish the paper installation process.
WARNING
No modification of this equipment is allowed.
Do not modify this equipment without authorization of the manufacturer.
If this equipment is modified, appropriate inspection and testing must be conducted to
ensure continued safe use of equipment.