Bionet CardioTouch3000, Руководство по эксплуатации

Страница: 35 / 120

35 / 120
E3KOM-7.00
CardioTouch3000 Operation Manual
3) Starting ECG recording
- Connect leads to the patient, and then turn on the device in accordance with the
preparation steps for measuring electrocardiogram.
- Check the setting for filter, size of signals, printing speed, channels and rhythm. Set up
the new values if you want to modify them.
- Input the patient‘s information
- If the waveform displayed on the LCD is abnormal or has excess noise, follow the
instruction of ―Countermeasures by Bad Lead Connection‖.
- If the waveform displayed on the LCD is normal, press the ‗RECORD‘ key to record the
electrocardiogram of the patient.
- Press the ‗COPY‘ button to print out the previously saved 10-second data or modified
data.
- Press the ‗RHYTHM‘ key to monitor the ECG waveform through the printer not through
the LCD.
- Press the ‗ESC‘ key to stop the operation while printing or recording.
The following buttons will be most commonly used when operating CardioTouch3000.
Print out the rhythm data on A4 size or continuous paper.
10sec. are saved and are printed as an output form after processing.
Process the recorded data with or without revision and print them out.
It operates the product in the most frequently used operation from
the ECG diagnosis test to data saving.
It transfers the test data, or saved data to the server PC.
Cancel commands or change into the former mode for main menu
printing.