Bionet CardioTouch3000, Руководство по эксплуатации

Страница: 109 / 120

109 / 120
E3KOM-7.00
CardioTouch3000 Operation Manual
12 Ping : Failed
When there is connecting
failure between network
and PC with BMS Server
- Check System setup and
network
- Check PC network setup
-Check LAN cable or wireless
environment
13
IP address
conflict.
The devices IP address is
already in use on the
network
Please contact ‗Network Team‘ to
check IP address, and set right IP
in turn of System setup and
Network
14
Connection Error.
Check lan cable,
network setting
and relevant
program.
When there is failure of
network connection
Please check LAN cable
connection, network setting,
server PC‘s networking and
related S/W programs
15 File Trans Fail!!
When file transmission to
server PC or USB memory
fails Check server PC‘s networking
conditions, and USB memory, and
retry
16 Recharge Battery!
When the battery level is
Low Please connect power cable or
charge battery
17 Printer: Time out.
Printer stops working due
to technical problem of
device
React the printer
18
Printer: Busy
continue When the wrong printer
data were input
React the printer
19
Printer:
Temperature high
When the Printer gets
heated due to long and
continuous use of printer
Please stop the use of printer for
at least one minute and try again
20
Printer: Paper
empty When the printing paper is
completely out Please put new roll of printing
paper for use
21
Printer: Printer not
ready
When there is no ‗ready‘
answer from printer
module
React the printer
22
Printer: Unknown
data When the wrong protocol
was put into the printer
React the printer
23 Abnormal End!
When the printer was
abnormally forced to stop
during printing
Re-start printing