Binder MKF 115, Руководство по эксплуатации

Страница: 80 / 115

MKF+ MKFT (E3.2) 07/2017 page 80/115
18. Disposal
18.1 Disposal of the transport packing
Packing element Material Disposal
Straps to fix packing on pallet
(size 115)
Plastic Plastic recycling
Wooden transport box (size 720,
option for size 115, 240)
with metal screws
Non-wood (compressed
matchwood, IPPC standard)
Wood recycling
Metal Metal recycling
Pallet
with foamed plastic stuffing
Solid wood (IPPC standard) Wood recycling
PE foam Plastic recycling
Transport box (size 115, 240)
with metal clamps
Cardboard Paper recycling
Metal Metal recycling
Top cover Cardboard Paper recycling
Edge protection Styropor
®
or PE foam Plastic recycling
Protection of doors and racks PE foam Plastic recycling
Upholstered transport piece
(L-type profile) for door support
Steel or aluminum with plastic
Keep it for transportation purpose.
Disposal: Metal recycling
Bag for operating manual PE foil Plastic recycling
Insulating air cushion foil (packing
of optional accessories)
PE foil Plastic recycling
If recycling is not possible, all packing parts can also be disposed of with normal waste.
18.2 Decommissioning
Turn off the main power switch (3) and the humidity switch (4). Turn off the rear power switch (20). Dis-
connect the chamber from the power supply. Remove the water installation.
After turning off the chamber by the main power switch (3), always close the tap used for the
water supply.
•
Temporal decommissioning: See indications for appropriate storage, chap. 3.3.
In case of a prolonged temporal decommissioning: Leave the chamber door open or remove the ac-
cess port plugs. For several weeks out of service, we recommend turning on the chamber every 3
days and operating it about 30 minutes in the cooling mode. This will ensure a quicker restart.
•
Final decommissioning: Dispose of the chamber as described in chap. 18.3 to 18.5.
18.3 Disposal of the chamber in the Federal Republic of Germany
According to Annex I of Directive 2012/19/EU of the European Parliament and of the Council on waste
electrical and electronic equipment (WEEE), BINDER devices are classified as “monitoring and control
instruments” (category 9) only intended for professional use“. They must not be disposed of at public col-
lecting points.
The chambers bear the symbol for the marking of electrical and electronic equipment man-
ufactured / placed on the market in the EU after 13 August 2005 and be disposed of in sep-
arate collection according to Directive 2012/19/EU on waste electrical and electronic
equipment (WEEE) and German national law for electrical and electronic equipment (El-
ektro- und Elektronikgerätegesetz, ElektroG). WEEE marking: crossed-out wheeled bin with
solid bar under. A significant part of the materials must be recycled in order to protect the
environment.