Binder MKF 115, Руководство по эксплуатации

Страница: 43 / 115

MKF+ MKFT (E3.2) 07/2017 page 43/115
8. Manual Mode
In Manual Mode (HAND) you can enter a temperature set-point, a humidity set-point, and the switching-
state of up to 8 operation lines. Operation line 1 can be used to control the bedew protection (chap. 10).
Operation lines 2 to 5 serve to switch any device connected to the zero-voltage relay outputs (DIN sock-
ets (11) and (12), chap. 11). Operation line 8 releases the compressed air dryer (option, chap. 16.7). The
other operation lines are non-functional. All settings remain valid in Manual Mode (HAND) until the next
manual change, if the chamber had been turned off or in case of toggling to Idle Mode or Program Mode
(AUTO).
8.1 Set-point entry
Idle Mode
No heating or refrigerating function,
no humidification.
The fan is off.
Toggling to Manual Mode Change of page
Toggling between temperature set-point, humidity set-point, and operation lines.
Arrow buttons to select the operation
lines
(Operation line 1 = bedew protection) Arrow buttons to
enter the value
Button to move the decimal point
Unlock the keyboard locking (option, chap. 16.5) via the key switch to enter the set-point.
08:43:55 15.12.13
HAND
08:43:55 15.12.13
Operating contacts
DRY
Contact 2
Contact 3
Contact 4
Contact 5
Contact 6
Contact 7
Contact 8
On
Off
Aus
Aus
Aus
Aus
Aus
Off
HAND
DRY
Off
On
Hand-Mode
TEMP
Oper
+ 40 .0 °C
+80.0 %
TEMP
+0060.0 °C
HUMID
+65.0 %r.H.
EXIT
08:43:55 15.03.13
HAND
HAND
Hand-Mode
TEMP
Steuerkontakte
+29.3 °C
+80.0 %
Hand-Mode
TEMP
Operating contacts
+40.0 °C
PGM CONFIG
W VIEW->
EXIT
HUMID +65.0 %r.H.
W X
08:43:55 15.12.13
CONFIG VIEW-> PGM
TEMP
0.0
26.8
°C
HUMID
0.0
58.6
%rH
HAND