Binder MKF 115, Руководство по эксплуатации

Страница: 89 / 115

MKF+ MKFT (E3.2) 07/2017 page 89/115
Chamber size 115 240 720
Climatic data (with humidity)
Temperature range °C / °F +10 to +95 / 50 to 203
Temperature range with optional compressed air
dryer
°C / °F 0 to +95 / 32 to 203
Temperature fluctuation ± K 0.1 to 1.3 0.1 to 1.3 0.2 to 1.5
Humidity range % r.H. 10 to 98 10 to 98 10 to 98
Humidity range with optional compressed air dryer % r.H. 5 to 98 5 to 98 5 to 98
Humidity fluctuation ± % r.H.
≤ 2.5 ≤ 2.5 ≤ 2.5
Dew point temperature range °C / °F +5 to +94 / 41 to 201
Dew point temperature range with optional com-
pressed air dryer
°C / °F -28 to +94 / -18.4 to 201
Max. heat compensation at 25 °C / 77 °F and 90 %
r.H. (without optional compressed air dryer)
W 400 400 1000
Electrical data
IP-system of protection acc. to EN 60529 IP 20 20 20
Nominal voltage (+/-10%) at 50 Hz power frequency V 400 400 400
Current type 3N~ 3N~ 3N~
Nominal power kW 4.80 6.80 11.00
Power plug: CEE plug 5-poles Amp 16 16 32
Over-voltage category acc. to IEC 61010-1 II II II
Pollution degree acc. to IEC 61010-1 2 2 2
Over-current release category B,
3 x internal
Amp 16 16 25
Electrical data of the voltage and frequency changer
IP-system of protection acc. to EN 60529 IP 23 23 23
Nominal voltage (+/-10%) 60 Hz (input side) V 480 3N~ 480 3N~ 480 3N~
Nominal power kW 9 9 13
Over-voltage category acc. to IEC 61010-1 II II II
Pollution degree acc. to IEC 61010-1 2 2 2
Fuse A 16 16 25
Environment-specific data
Noise level (mean value) dB(A) 62 65 65
Noise level with optional compressed air dryer
(short-term) (mean value)
dB(A) 85 85 85
Noise level with voltage and frequency changer
(mean value)
dB(A) 67 67 67
Energy consumption
at +25 °C
/ 77 °F and 60 % r.H.
Wh/h 1250 1500 3900
Filling weight of refrigerant R 404A (GWP 3750)
kg / lbs. 2.00 / 4.41 2.20 / 4.85 5.00 / 11.02
Note: Chambers with voltage and frequency changer: Average heating up time reduced by 0.3 K/min
each.
All technical data is specified for unloaded chambers with standard equipment at an ambient temperature
of +22 °C
± 3 °C / 71.6 °F ± 5.4 °F and a power supply voltage fluctuation of +/-10%. Technical data is
determined in accordance to BINDER Factory Standard Part 1:2015 following DIN 12880:2007.
All indications are average values, typical for chambers produced in series. We reserve the right
to change technical specifications at any time.
If the chamber is fully loaded, the specified heating up and cooling down times may vary ac-
cording to the load.
Bringing a source of humidity into the inner chamber will affect the minimum humidity specifi-
cation and may affect the humidity accuracy.