Binder MKF 115, Руководство по эксплуатации

Страница: 92 / 115

MKF+ MKFT (E3.2) 07/2017 page 92/115
20.6 Equipment and options (extract)
To operate the chamber, use only original BINDER accessories or accessories / components
from third-party suppliers authorized by BINDER. The user is responsible for any risk arising
from using unauthorized accessories.
Regular equipment
Microprocessor display program controller with 2-channel technology for temperature and humidity
Electronically controlled humidifying and dehumidifying system with capacitive humidity sensor *)
(humidity range, see diagram)
Integrated freshwater can
Heated window and interior lighting
Programmable bedew protection of charging material
Environmentally friendly refrigerant R404a (MKF / MKFT) and R 23 (MKFT)
Temperature safety device class 2 acc. to DIN 12880:2007
Internal socket 230 V AC 230V, 1N ~ 50-60 Hz, max. load 500W, protection type IP 54
4 zero-voltage relay outputs, addressable via operation lines
Ethernet interface for computer communication
1 access port with silicone plug
∅
50 mm / 1.97 in left (MKF / MKFT 115, 240),
2 access ports with silicone plug
∅
80 mm / 3.15 in left and right (MKF / MKFT 720)
Rack, stainless steel
Aeration / venting
Alarm message in case of lack of water inside the freshwater can
Four castors (2 lockable)
Options / accessories
Additional rack, stainless steel
Perforated rack, stainless steel
Reinforced rack with 1 set of rack lockings
Securing elements for additional fastening of racks (4 pieces)
Keyboard locking
Lockable door
Safety kit for water connection with hose burst protection device and reflux protection device, pre-
mounted assembly (available via BINDER INDIVIDUAL customized solutions)
Access ports 30 mm, 50 mm, 80 mm, 100 mm, 125 mm, left or right, with silicone plug
Over-/under temperature safety device class 2
Analogue outputs 4-20 mA actual and set-point values for temperature and humidity with 6 pole DIN
socket, DIN plug included
Additional measuring channel in the MB1 controller for digital specimen temperature display with flexible
Pt100 temperature sensor
Communication interface RS422
BINDER Data Logger kit for temperature T 220 (chamber values), for temperature / humidity TH 100
(chamber values) or TH 100/70 (chamber and ambient values)
Controlled compressed air dryer particularly suitable for compliance with the common automotive
standards
Water cooling (MKF. For MKFT available via BINDER INDIVIDUAL customized solutions)
Notch-type access port 35 x 100 mm in the door
BINDER Pure Aqua Service
Exchange cartridge for BINDER Pure Aqua Service