Binder MKF 115, Руководство по эксплуатации

Страница: 71 / 115

MKF+ MKFT (E3.2) 07/2017 page 71/115
15. Defrosting at refrigerating operation
BINDER alternating climate chambers are very diffusion-proof. To ensure high temperature precision
there is no automatic cyclic defrosting device. However, at very low temperatures, the moisture in the air
can condense on the evaporator plates leading to icing.
Always close the door properly.
Operation with temperature set-points above +5 °C / 41 °F at an ambient temperature of 20 °C /
68 °F:
The air defrosts the ice cover automatically. Defrosting is continually performed.
Operation with temperature set-points below +5 °C / 41 °F or in the discontinuous range (chap.
14):
The evaporator can cover with ice. Defrost the chamber manually.
With temperature set-points below +5 °C / 41 °F , regularly defrost the chamber manually:
•
Set the humidity to 0 % r.H. and turn on the humidifying system at humidity switch (4).
•
Set the temperature to 60 °C / 140 °F (Manual Mode).
•
Let the chamber operate for approx. 1 hour with the door closed.
Too much ice on the evaporator is noticeable by reduced refrigerating performance.
When turning off the chamber following prolonged refrigerating below +5 °C / 41 °F , there is danger of
overflowing due to uncontrolled defrosting of icing on the evaporator.
CAUTION
Uncontrolled defrosting of icing on the evaporator.
Danger of overflowing.
After several days of refrigerating below +5 °C / 41 °F :
∅
Do NOT directly turn off the chamber.

Manually defrost the chamber (see description above).

Then, shut down the chamber at the main power switch (3) and close the tap of the
water supply.