Bender ATICS Series Скачать руководство пользователя страница 87 | Manualshive

Страница: 87 / 104

Bender ATICS Series Скачать руководство пользователя страница 87

ATICS-DIO_D00080_03_M_XXEN / 04.2021 87

ATICS-…-DIO

Why does writing back reports/backups lead to error messages?

ATICS® – like many Bender devices – can be monitored and configured by means of a Bender gateway
CP700, COM46x… etc. The gateways are operated via a web user interface that is displayed using an
Internet browser.

One of the functions of these gateways is saving reports. A report is used to store the settings and
measured values of a bus device. By creating a backup, data loss (e.g. by accidentally deleting settings)
can be avoided. The backup can also be imported to another device of the same type. This may be nec-
essary if a device is replaced or if several devices are to be configured for similar tasks.

ATICS® is continuously further developed and maintained. This also affects the content of the report file.
If you try to save a report that was generated with an older ATICS® (version older than 1.20) in an ATICS®
with a current firmware, this can lead to error messages. These error messages are displayed on the
web user interface.

• Repeat the saving process of the report in ATICS® several times. This way, the majority of the

parameters can still be transferred. The remaining error messages indicate the parameters
that have to be changed manually.

• To conclude, check all settings saved in the ATICS®.
• Save these settings in a new report file.

«
...
85
86
87
88
89
...
»

Содержание ATICS Series









































































































Отзывы:

Нет отзывов