manualshive.com logo in svg

Bender ATICS Series, Руководство пользователя, Страница: 29 / 104

Поделиться
Скачать
Bender ATICS Series Скачать руководство пользователя страница 29

 

ATICS-DIO_D00080_03_M_XXEN / 04.2021 29

ATICS-…-DIO

4.1.2  Removing terminal cover

4.1.3  DIN rail mounting

 

i

Description applies to ATICS-…-DIO

 

I

C

aution

! 

Screws must be tightened, otherwise the vibrations generated during switching may 

damage the ATICS®.

A

B

N

N

N

N

N

1. Push back the locking hook (B) in the middle 

of the top and bottom terminal cover (A) by 
using a screwdriver.

2. Remove the terminal cover.

D

C

N

1. Place the ATICS® on the top edge of the rail.
2. Use a screwdriver to pull down the lower yellow 

slide lock (C) and snap the ATICS® into place with 
slight pressure. Check that the slide lock has 
properly snapped into position by pulling slight-
ly the lower part of the enclosure.

3. Fix all terminals with Allen screws terminals. 

Tightening torque: 5 Nm.

4. Fasten the terminal covers.
5. Tighten screws (D) (PZ1, 8,8 lb-in, 1 Nm).

Содержание ATICS Series









































































































Отзывы:

Нет отзывов