Bender ATICS Series, Руководство пользователя, Страница: 63 / 104

ATICS-DIO_D00080_03_M_XXEN / 04.2021 63
ATICS-…-DIO
Menu Description
21. Phase seq: left
Line 1: Phase sequence of the phases L1, L2, L3
22. U2(1-N): 230V
Line 2: Measured value mains voltage phase L1 to neutral conductor N
23. U2(2-N): 230V
Line 2: Measured value mains voltage phase L2 to neutral conductor N
24. U2(3-N): 230V
Line 2: Measured value mains voltage phase L3 to neutral conductor N
25. U2(1-2): 400V
Line 2: Measured values phase L1 to phase L2
26. U2(2-3): 400V
Line 2: Measured values mains voltage phase L2 to phase L3
27. U2(3-1): 400V
Line 2: Measured values mains voltage phase L3 to phase L1
28. Line 2: 50.0Hz
Line 2: Measured value frequency
29. Unbalance: 0%
Line 2: Unbalance of phases L1, L2, L3
30. Phase seq.: left
Line 2: Phase sequence of the phases L1, L2, L3
31. t(1->2): 356ms
Changeover period t(1->2) of the last test
The following different channel assignment applies to the „Test“ setting in the „Interface/Profile“ menu:
Menü Bedeutung
4. t(1->2): 356ms
Changeover period t(1->2) of the last test
7. TEST: 02.07.19
Next TEST by (date)
8. Service: 11.07.19
Next service by (date)
9. I(3):5A
Load current TN system
31. t(2->1): --
Return transfer delay time is enabled, seconds counting backwards or switch-
back lock enabled
* In the event of an alarm, the phase voltage which has first been detected as faulty and which has triggered the alarm is
indicated.
i
All messages (except measured value frequency) are also present on the BMS bus (see chapter
„Messages with error code or service code“ on p. 84).