Bender ATICS Series, Руководство пользователя, Страница: 66 / 104

66 ATICS-DIO_D00080_03_M_XXEN / 04.2021
Menu mode: Operation and setting
7.3.3.2 Operating example: Config.logger
1. Use the arrow buttons to select the re-
quired entry. In this case: The settings for
the digital input are changed here.
2. Press " " to call up the additional text for
the selected entry. The function of the digi-
tal input has been changed from "off" to
"0". The last line contains an identification
code for the type of modification (in this
case: [4/1]). Channel 1 means that the first
digital input has been changed.
Please contact the Bender service and provide the identification number if the modification
led to an undesirable behaviour of the device.
7.3.4 Menu 4: Settings
The settings menus are protected by a password (see chapter „Settings menu 10: Password“ on p.
80). Password protection is only effective if the password has been enabled. When opening one of
those settings menus, the password entry screen appears automatically:
After entering a valid password, all settings menus
(except the "Service" menu) are freely accessible until
the menu mode is exited.
The following menu items are available for configur-
ing the device:
Menu item Function Page
Exit Exit settings menu "Settings"; go up one menu level
1. Changeover Adjust settings for changeover switch P. 67
2. Voltage Adjust settings for voltage monitoring P. 69
3. Current Adjust settings for current monitoring (short-circuit detection) P. 70
4. Relay Set mode of operation and function of alarm relay P. 71
5. Dig. input Set operating behaviour of the digital input P. 74
6. Data loggers Adjust settings for data loggers P. 76
7. Languages Select the operating language for the device (English, German, French, Polish) P. 78
8. Interface Set the BMS bus address of this device,
allow settings to be changed via the interface,
allow performing a test via the interface. P. 78
10/ 17
10/ 17
Settings
Enter password:
0 0 0