Bender ATICS Series, Руководство пользователя, Страница: 67 / 104

ATICS-DIO_D00080_03_M_XXEN / 04.2021 67
ATICS-…-DIO
Menu item Function Page
9. Clock Set the date and time on the real-time clock on this device. The time setting is
synchronised via the BMS bus. The device with address 1 (e.g. MK2430, MK800,
TM…alarm indicator and operator panel or CP9xx) synchronises all other devices
every hour. P. 79
10. Password The device has two separate passwords for the "Settings" menu and the "TEST"
menu. Adjustable in each case: change password, enable/disable password P. 80
11. Service Only intended for settings by authorised Bender service personnel.
Call up information about the device status and make settings for specific operat-
ing conditions. P. 81
7.3.4.1 Settings menu 1: Changeover
The times set in this menu determine the timing of a changeover. Observe also the time diagrams in
the chapter „The automatic transfer switching device“ on p. 15
.
Menu item Function
Exit Exit settings menu "Changeover"; go up one menu level
1. t(start) Delayed switch-on after complete power failure:
Setting range:
0 s…100 s
Resolution of settings: 50 ms / 100 ms / 1 s / 5 s
2. t(0) Time delay in switch position "0" (dead time):
Setting range:
140 ms…100 s
Resolution of settings: 10 ms / 50 ms / 100 ms / 1 s / 5 s
3. t(2->1) Return transfer delay time to the preferred line:
Setting range:
0 s…180 min
Resolution of settings: 50 ms / 100 ms / 1 s / 5 s / 1 min
4. t(test) Test time for "Autom. changeover":
Setting range:
2 s…180 min
Resolution of settings: 1 s / 5 s / 1 min