Belden Grass Valley Kayenne K-Frame, Инструкция по установке и обслуживанию

Страница: 225 / 288

KAYENNE K-FRAME — Installation & Service Manual 225
Router Interface
Router Interface Installation
Control Interface Cabling
Connect an Ethernet cable from a Kayenne K-Frame system Ethernet
switch to the external routing system Ethernet network. The system can
communicate with devices on different networks via a gateway router. If a
gateway router is not used, the external routing system must be on the
same subnet as the Kayenne K-Frame system.
Video Interface Cabling
Connect each external routing system destination to an available input con-
nector on the Kayenne K-Frame Video Processor. You will need to know the
input connector number used for each destination when you configure the
Kayenne K-Frame source.
External Routing System Configuration
It is assumed the external routing system has already been configured for
basic use in your facility, and only needs to be re-configured to interface
with the Kayenne K-Frame system.
Configuring a GV Switcher Router
Setting IP Addresses
The Eng Setup Router menu is used to set the IP Address(es) the Kayenne
K-Frame system will use to communicate to the external routing system.
The external routing system can have an optional redundant, or secondary,
controller which takes over should the primary fail. Both router control
systems will require their own IP address settings.