Belden Grass Valley Kayenne K-Frame, Инструкция по установке и обслуживанию

Страница: 132 / 288

132 KAYENNE K-FRAME — Installation & Service Manual
Section 5 — Basic Configuration
If Lever Arm or Joystick calibration becomes necessary, see Control Panel
Adjustments on page 231 .
Engineering Setups
Kayenne K-Frame inputs and outputs are connected to the rear of the Video
Processor Frame. These video signals need to be configured to your
facility’s requirements. Engineering Setups defines Kayenne K-Frame
system component functionality and how it is cabled into a facility. Engi-
neering setups are intended to be used and maintained by technical staff,
and can be loaded and saved to disk.
The Engineering Setup menus are accessed by touching the
Eng Setup
menu
button at the bottom of the screen, and then selecting the appropriate Menu
Category touch button.
Source Definition
Source definition tells the system which physical inputs or internal signals
to use when a particular external (only) source is selected. The source defi-
nition, denoted by an Engineering ID number, specifies the signals
involved, how to process that signal, and what external devices, if any, are
associated with that source. Each Kayenne K-Frame Video Processor has
one source definition set, shared by all users of that system (both control
surfaces in both suites).
Source Definition Inputs
Change Direct Source Definition
1. Select
Eng Setup
,
Source Definition
in the menu.
2.
Select a Source located on left side of the screen (it is a vertical scrolling
list).
Table 11. Standard K-Frame Source Definition Inputs
Inputs Modular Inputs
1-32 33-64 65-96 97-128 129-160 161-164 169-172 177-180 185-188
165-168 173-176 181-184 189-192
Table 12. Compact K-Frame Source Definition Inputs
Inputs Modular Inputs
1-32 33-64 N/A N/A N/A 161-164 169-172 N/A N/A
165-168 173-176 N/A N/A