Belden Grass Valley Kayenne K-Frame, Инструкция по установке и обслуживанию

Страница: 204 / 288

204 KAYENNE K-FRAME — Installation & Service Manual
Section 5 — Basic Configuration
8. Select the
Acquire Resources
menu button.
9.
Select an MV (
MV1
-
MV4
) button in the Logical Resources pane.
10. Select an unallocated VPE/ME resource in the Physical Resources pane.
Configure outputs assigned to external monitors:
11. Select Eng
Setup
,
Outputs
in the menu.
12.
Select an output assigned to an external monitor in the Physical
Outputs pane.
13.
With the
Fixed Sources
button selected (top right of menu) using the
scroll bar or filter for the scrolling sources list, find and select one of the
four fixed multiviewer sources, for example
Mview 4
.
Result: The currently selected Multiviewer layout is visible on the external
monitor.
Acquire Multiviewer Resources with a Compact (Six-Keyer) Frame
Any available unused ME/VPEs (Video Processing Engines) can be allo-
cated as Multiviewer outputs to external monitors provided a physical ME
resource is present in the Frame and the Multiviewer is licensed. Up to four
external multiviewer feeds are possible and can be acquired by one suite or
split between suites, when licensed.
Note The MX-MV Multiviewer, a dedicated physical resource, is available on the
Standard Frame only so it will be shown as NP (Not Present) in the Eng Setup,
Acquire Resources menu for the Compact K-Frame. It cannot be acquired but
shows created with the Compact K-Frame can be used on the Standard
K-Frame where the MX-MV resource can be acquired.