Belden Grass Valley Kayenne K-Frame, Инструкция по установке и обслуживанию

Страница: 257 / 288

KAYENNE K-FRAME — Installation & Service Manual 257
Creating Compact Flash Cards
Creating Compact Flash Cards
The Control Panels each use their own specially formatted and partitioned
Compact Flash (CF) card. The system cannot use blank CF cards directly
formatted by a PC or other device.
The K-Frame Switcher Installer program is used to format, partition, and
load boot files onto system CF cards. Once prepared in this manner, the
appropriate GV Switcher software (Control Panel) will need to be installed
onto each card. System configuration information will also need to be
reloaded and/or re-entered after CF card replacement to restore normal
system operation.
Materials Required
To format a K-Frame Control Panel CF card you will need:
• A CF card reader/writer (USB 2.0 recommended),
• PC, or Menu Panel equipped with a mouse and keyboard,
• K-Frame Switcher Installer application program deployed onto the PC
or Menu Panel, and
• GV Switcher release software.
After creating new CF cards, you will need the following to restore your
system to full operation:
• Backup system configuration files (a Show file, or a set of Eng Setups
and User Setups files), and
• Node Settings information (IP addresses and names of all system com-
ponents). This may be written notes, screen shots, or a spread sheet.
This information is not saved to configuration files.
CF Card Formatting Procedure
1. Connect the CF card reader/writer to the USB port of the PC or Menu
Panel and insert the CF card into the reader/writer.
2. Launch the K-Frame Switcher Installer program.
3.
Select
System
, click on the
Create CF
button and choose the CF card type;
Kayenne Panel
or
Karrera Panel
.