Belden Grass Valley Kayenne K-Frame, Инструкция по установке и обслуживанию

Страница: 227 / 288

KAYENNE K-FRAME — Installation & Service Manual 227
Router Interface
nications, and if successful will continue using it in the future. If communi-
cations then is lost to the secondary control system, the system will attempt
to reestablish communications with the primary router control system.
Defining Routed Sources Definition
The Eng Setup Source Definition menu is used to define routed Kayenne K-
Frame sources, which includes specifying which router destination will be
associated with each switcher source.
1. Press the
Eng Setup
Menu panel button, then touch the
Source Definition
category selection button, to go to this menu.
2. Select the source to be configured with the router on the left scrolling
list.
3. Touch the Video Input data pad and enter the number of the input that
will be used with the router video destination.
4. If the routed source will have an associated key signal, touch the
appropriate Key Input button, then touch the Key Input data pad and
enter the number of the input that will be used with the router key
signal destination.
Note If you assign a key input, the router system needs to be configured to switch
that key destination along with the video destination. Router levels can be
used to accomplish this.
5. Touch the
Router
type button to identify it as a routed source.
Note The adjacent status indicator is green when a router is detected, and red
when there is no response. If red, you should check the K-Frame or router
system configuration or the physical Ethernet connections.