Belden Grass Valley Kayenne K-Frame, Инструкция по установке и обслуживанию

Страница: 118 / 288

118 KAYENNE K-FRAME — Installation & Service Manual
Section 5 — Basic Configuration
ment. See your network administrator for information about gateway
server installation and configuration.
Kayenne K-Frame Default IP Addresses On Isolated Network
Each Kayenne K-Frame system is shipped with default IP addresses (see
Factory Default Network Settings on page 92 ). Grass Valley has chosen these
default IP addresses to make Kayenne K-Frame configuration easy.
Kayenne K-Frame devices should communicate with each other right out
of the box when properly connected on an isolated network.
Connecting to an Existing Network
Additional network configuration is required if you connect the Kayenne
K-Frame Ethernet LAN to your facility Ethernet backbone, install addi-
tional Kayenne K-Frame system components, or have multiple Kayenne K-
Frame systems on the same network cabling. For example, if more than one
Kayenne K-Frame system resides on the same network, the IP address of
each additional Kayenne K-Frame device must be changed before it is con-
nected to the network.
To enable communication between Kayenne K-Frame and other facility
devices, you will need to change the Kayenne K-Frame system default
network addresses to match the facility address, or place a router between
Kayenne K-Frame and the facility networks. This complexity of network
configuration is beyond the scope of this manual. Consult a networking
expert if such networking is desired.
See your network System Administrator before connecting the Kayenne K-
Frame system to an existing network or making any IP address changes.
The IP addresses (including any Subnet mask) of all the Kayenne K-Frame
devices on the network must be known before any changes are made.
Setting IPs with the K-Frame Switcher Installer Program
The K-Frame Switcher Installer Program can be used to set IP addresses of
the Kayenne K-Frame Video Processor and Kayenne K-Frame Control
Panels.
When the Kayenne K-Frame software package has been deployed to your
Menu Panel or PC, the K-Frame Installer icon will appear on the desktop
(
Figure 79 ).
Note A mouse and keyboard is required to navigate through the K-Frame Installer
program and enter IP numbers and system names. Standard USB devices
can be connected to any of four available ports on the Kayenne K-Frame
Menu Panel.
Figure 79. Installer Icon