Belden Grass Valley Kayenne K-Frame, Инструкция по установке и обслуживанию

Страница: 152 / 288

152 KAYENNE K-FRAME — Installation & Service Manual
Section 5 — Basic Configuration
b. In the Tally Contribution pane, select an Ethernet Tally IP Address
data pad and enter the IP address for an Ethernet Tally system in the
pop-up keypad and press
Enter
.
Figure 99. Ethernet Tally IP Address
2. Select the adjacent Enable button (highlights green when on).
Note When the connection is enabled, the Connection Status LED turns green.
3.
At the tally client, set the connection to
Port 2012
to establish the initial
connection between the GV Switcher and Ethernet Tally systems.
Set Source Names with External Ethernet Tally
Support for setting source names through external Ethernet tally clients can
be added by tally client developers. Once enabled, the tally client can send
data to the Frame that will modify any or all source names in the system,
including the Engineering Names for each source. Additionally, the
Control Panel, OLED, and Menu names for each logical source in each suite
can be set externally.